Author Topic: Raspberry pi 3  (Read 402 times)

ZzzzeyeZzzz

  • Administrator
  • Newbie
  • *****
  • Posts: 41
    • View Profile
    • https://www.chesscoin.de/
Raspberry pi 3
« on: November 22, 2018, 07:27:59 pm »
Come here and show us with screenshorts how to start the ChessCoin client with Rapsberry pi 3  :)

https://bitcointalk.org/index.php?topic=1510517.2200


You get 12500 ChessCoins :) give me your ChessCoin address!
« Last Edit: November 22, 2018, 10:15:18 pm by ZzzzeyeZzzz »

Andrey123

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Raspberry pi 3
« Reply #1 on: November 23, 2018, 06:04:28 am »
Hello!
Instructions for launching a purse at the Raspberry Pi 3.

Configuring Raspberry Pi 3
What do we need:
- Raspberry itself with power cable;
- SD card and computer with card reader;
- USB keyboard and mouse;
- HDMI cable;
- monitor with HDMI input.

1. Download from here: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip.torrent
2. Insert the SD card into the card reader. To save the system to a card, use Win32 Disk Imager.
Download link - https://sourceforge.net/projects/win32diskimager/
3. Select the unpacked image, then the flash drive, then click "Write" and wait.

4. After completing the recording process, you can insert the card into Raspberry.
5. Connect the monitor, mouse, keyboard and power.

Login: pi
Password: raspberry

Remember them, you will have to enter often. You can change the password in Settings - Raspberry Pi Configuration.

Here it is better to disable Splash Screen splash screen.
6. Connect the Internet, wi-fi or wired. Here everything is simple, as in Windows.

7. After the appearance of the Internet, you can set the desired locale and time zone in Raspberry Pi Configuration.

8. Start the terminal

9. Updated:
sudo apt-get update
sudo apt-get dist-upgrade

10. We put the remote access:
sudo apt-get install tightvncserver
sudo apt-get install xrdp

11. Increase SWAP:
sudo nano /etc/dphys-swapfile
Change the value of CONF_SWAPSIZE = 100 to 1000. To save the file, press Ctrl + X followed by Y then Enter.

12. Connect SWAP:
sudo dphys-swapfile setup
sudo dphys-swapfile swapon

13. Now you can disconnect the mouse, keyboard, monitor and connect from a regular computer. Run in Windows Start - All Programs - Standard - "Remote Desktop Connection" or Start - Run - mstsc
Enter the IP address of Raspberry, click Connect and enter login and password (pi raspberry).

Now you can start installing the purse ChessCoin.
1. Start the terminal.
2. Set the dependencies:

sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev \
libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev \
libssl-dev libdb4.8 ++ - dev

3. And this:
1: sudo apt-get install autoconf libtool libssl-dev libboost-all-dev libminiupnpc-dev -y
2: mkdir ~/bin
cd ~/bin
3: wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz
tar -xzvf db-4.8.30.NC.tar.gz
cd db-4.8.30.NC/build_unix/
../dist/configure --enable-cxx
make -j4
sudo make install

4. And this:
sudo apt-get install libdb5.3++-dev libdb++-dev libdb5.3-dev libdb-dev && ldconfig

5. To enable port forwarding, install UPnP:
sudo apt-get install miniupnpc

6. Next, download the source files and run the assembly of the wallet.:
git clone https://github.com/coinforchess/chesscoin
cd chesscoin
qmake
make

It is mandatory in the properties of the downloaded purse, under the "Permissions" tab, to set the value "All".


If an error appears on the first start, you can safely run the second time.
And wait for complete synchronization.

P.S. I will be glad to coins) CVvHzUknAgtgPuTUdMLtNKysLbsbd33qks
« Last Edit: November 23, 2018, 06:09:18 am by Andrey123 »

ZzzzeyeZzzz

  • Administrator
  • Newbie
  • *****
  • Posts: 41
    • View Profile
    • https://www.chesscoin.de/
Re: Raspberry pi 3
« Reply #2 on: November 23, 2018, 07:23:57 am »
Hello!
Instructions for launching a purse at the Raspberry Pi 3.

Configuring Raspberry Pi 3
What do we need:
- Raspberry itself with power cable;
- SD card and computer with card reader;
- USB keyboard and mouse;
- HDMI cable;
- monitor with HDMI input.

1. Download from here: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip.torrent
2. Insert the SD card into the card reader. To save the system to a card, use Win32 Disk Imager.
Download link - https://sourceforge.net/projects/win32diskimager/
3. Select the unpacked image, then the flash drive, then click "Write" and wait.

4. After completing the recording process, you can insert the card into Raspberry.
5. Connect the monitor, mouse, keyboard and power.

Login: pi
Password: raspberry

Remember them, you will have to enter often. You can change the password in Settings - Raspberry Pi Configuration.

Here it is better to disable Splash Screen splash screen.
6. Connect the Internet, wi-fi or wired. Here everything is simple, as in Windows.

7. After the appearance of the Internet, you can set the desired locale and time zone in Raspberry Pi Configuration.

8. Start the terminal

9. Updated:
sudo apt-get update
sudo apt-get dist-upgrade

10. We put the remote access:
sudo apt-get install tightvncserver
sudo apt-get install xrdp

11. Increase SWAP:
sudo nano /etc/dphys-swapfile
Change the value of CONF_SWAPSIZE = 100 to 1000. To save the file, press Ctrl + X followed by Y then Enter.

12. Connect SWAP:
sudo dphys-swapfile setup
sudo dphys-swapfile swapon

13. Now you can disconnect the mouse, keyboard, monitor and connect from a regular computer. Run in Windows Start - All Programs - Standard - "Remote Desktop Connection" or Start - Run - mstsc
Enter the IP address of Raspberry, click Connect and enter login and password (pi raspberry).

Now you can start installing the purse ChessCoin.
1. Start the terminal.
2. Set the dependencies:

sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev \
libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev \
libssl-dev libdb4.8 ++ - dev

3. And this:
1: sudo apt-get install autoconf libtool libssl-dev libboost-all-dev libminiupnpc-dev -y
2: mkdir ~/bin
cd ~/bin
3: wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz
tar -xzvf db-4.8.30.NC.tar.gz
cd db-4.8.30.NC/build_unix/
../dist/configure --enable-cxx
make -j4
sudo make install

4. And this:
sudo apt-get install libdb5.3++-dev libdb++-dev libdb5.3-dev libdb-dev && ldconfig

5. To enable port forwarding, install UPnP:
sudo apt-get install miniupnpc

6. Next, download the source files and run the assembly of the wallet.:
git clone https://github.com/coinforchess/chesscoin
cd chesscoin
qmake
make

It is mandatory in the properties of the downloaded purse, under the "Permissions" tab, to set the value "All".


If an error appears on the first start, you can safely run the second time.
And wait for complete synchronization.

P.S. I will be glad to coins) CVvHzUknAgtgPuTUdMLtNKysLbsbd33qks

Thank you - this is an introduction to a Raspberry PI3 try  :)

The 12500 ChessCoins are on their way: Transaction ID: 89be80b0cfe25ebb73925295888f513a87e86ddf43fe97551a509b885594068c

https://www.blockexperts.com/chess/tx/89be80b0cfe25ebb73925295888f513a87e86ddf43fe97551a509b885594068c


Here more links about Raspberry Pi System Software:
https://www.raspberrypi.org/downloads/


Is it much work for you to change the code to 0.32% interest? Write me a message in my mailbox!  :)